Toshiba TOSVERT VF-S15 series, Инструкция по эксплуатации

Страница: 163 / 394

E6582175
F-51
6
[Setting of jog run mode (RES-CC)]
Ex) Assign jog run mode to control terminal RES.
Title Function Adjustment range Setting
f113 Input terminal selection (RES) 0-203
18
(Jog run mode)
Note 1: During the jog run mode, low speed detection signal (LOW) is output but designated frequency reach
signal (RCH) is not output, and PID control does not work.
Note 2: When only the operation panel is used for operation in jog run mode, the jog run function does not need to
be assigned to any input terminal.
<Examples of jog run>
RES (JOG): ON + F:ON: Forward jog run
RES(JOG): ON + R: ON: Reverse jog run
( Frequency c F: ON: Forward run , Frequency c R: ON: Reverse run )

The jog run setting terminal (RES-CC) is enabled when the value of operation frequency is that of the jog
run frequency and below.
This connection does not function when operation frequency exceeds the jog run frequency.

The motor can be operated in jog mode while the jog run setting terminals are connected (RES-CC).

Jog run has priority to new operation command given during operation.

Even for
f261
=
0
or
1
, an emergency DC braking (
f603
=
2
) is prior to the setting.

No limits are imposed to the jog run frequency by the upper-limit frequency (parameter ul ).
ST-CC
F-CC
R-CC
RES-
Frequency command input
Reverse
Forward
Forward
0
Set frequency
(

=
18
)
Forward