Suzuki RA410, Руководство пользователя

Страница: 757 / 761

8) Route deployment harness out the vehicle.
9) Verify that the inside of the vehicle and the area surrounding
the vehicle are clear of all people and loose or flammable ob-
jects.
10) Stretch (1) the deployment harness to its full length 10 m (33
ft).
Special Tool
(A): 09932-75030
11) Place a power source near the shorted end (3) of the deploy-
ment harness. Recommended application: 12 Volts minimum,
2 amps minimum. A vehicle battery is suggested.
12) Completely cover windshield area and front door window
openings with a drop cloth, blanket to similar item (2). This re-
duces the possibility of injury due to possible fragmentation of
the vehicle’s glass or interior.
13) Notify all people in the immediate area that you intend to
deploy the air bag (inflator) module or activate the seat belt
pretensioner.
NOTE:
When the air bag deploys and the pretensioner acti-
vates, the rapid gas expansion will create a substantial
report. Wear suitable ear protection. Notify all people in
the immediate area that you intend to deploy the air bag
(inflator) module or to activate the seat belt pretension-
er and suitable ear protection should be worn.
After the air bag (inflator) module has been deployed,
the surface of the air bag may contain a powdery resi-
due. This powder consists primarily of cornstarch
(used to lubricate the bag as it inflates) and byproducts
of the chemical reaction.
Driver side for left hand steering vehicle
Driver side for right hand steering vehicle
WARNING:
After deployment/activation, the metal surfaces of
the air bag (inflator) module and the seat belt pre-
tensioner will be very hot. Do not touch the metal
areas of them for about 30 minutes after deploy-
ment/activation.
Do not apply water, oil, etc. to deployed air bag (in-
flator) module and activated seat belt pretension-
er.
Failure to follow procedures may result in fire or per-
sonal injury.
(A)
(A)
2
2
3
3
10B-62 AIR BAG SYSTEM