Suzuki RA410, Руководство пользователя

Страница: 649 / 761

REMOVAL
1) Clean both inside and outside of glass and around it.
2) Remove wiper arms and garnish.
3) Using tape, cover body surface around glass to prevent any
damage.
4) Remove rear view mirror, sunvisor, and front pillar trims (right
& left).
5) If necessary, remove instrument panel. Refer to “INSTRU-
MENT PANEL” in this section.
6) If necessary, remove head lining. Refer to “HEAD LINING” in
this section.
7) Remove (or cut) windshield molding until windshield edge
comes out. Remove (or cut) stopper.
8) Drill hole with eyeletter (1) through adhesive and let piano string
through it.
9) Cut adhesive all around windshield with piano string (1).
When using tool (2) to cut adhesive, be careful not to cause
damage to windshield. Use wire to cut adhesive along lower
part of windshield.
NOTE:
Use piano string (1) as close to glass as possible so as to
prevent damage to body and instrument panel.
2
BODY SERVICE 9-7