7B-20
AUTOMATIC TRANSMISSION
DIAGNOSTIC TROUBLE CODE (DTC) CLEAR-
ANCE
1) Disconnect negative cable from battery.
2) Leave the negative battery cable disconnected for more than 20
seconds.
3) Connect negative cable to battery.
DIAGNOSTIC TROUBLE CODE NO. TABLE
Refer to SECTION 6E1 for how to read DTC.
Diagnostic Trouble Code
No.
“CHECK ENGINE” lamp
flashing pattern
Diagnostic Area
Diagnosis
12
When this code is output repeatedly, no other DTC is stored in PCM
memory. If any other DTCs are in PCM memory, this code is output first
followed by output of these DTCs starting from the smallest code number
in the increasing order and they are repeated.
13
Throttle opening signal
For these DTCs, diagnose trouble ac-
cording to “DIAGNOSTIC FLOW TABLE”
16
Vehicle speed sensor
g
corresponding to each code No. de-
scribed in SECTION 6E1.
41
Shift solenoid A
Diagnose trouble according to corre
42
Shift solenoid B
Diagnose trouble according to corre-
sponding to each code No. described in
this section
46
Transmission range switch
this section.
Содержание RA410
