Suzuki RA410, Руководство пользователя

Страница: 690 / 761

ON-VEHICLE SERVICE
SERVICE PRECAUTIONS
SERVICE AND DIAGNOSIS
Before servicing or replacing seat belts, refer to following precautionary items.
Seat belts should be normal relative to strap retractor and buckle portions.
Keep sharp edges and damaging objects away from belts.
Avoid bending or damaging any portion of belt buckle or latch plate.
Do not bleach or dye belt webbing. (Use only mild soap and lukewarm water to clean it.)
When installing a seat belt anchor bolt, it should be tightened by hand at first to prevent cross-threading and
then to specified torque.
Do not attempt any repairs on retractor mechanisms or retractor covers. Replace defective assemblies with
new replacement parts.
Keep belts dry and clean at all times.
If there exist any parts in question, replace such parts.
Replace belts whose webbing is cut or otherwise damaged.
Do not put anything into trim panel opening which seat belt webbing passes through.
For seat belt with pretensioner
Refer to SERVICE AND DIAGNOSIS of SERVICE PRECAUTIONS under ON-VEHICLE SERVICE in SECTION
10B.
DISABLING AIR BAG SYSTEM (FOR VEHICLE WITH AIR BAG SYSTEM)
Refer to DISABLING AIR BAG SYSTEM of SERVICE PRECAUTIONS under ON-VEHICLE SERVICE in SEC-
TION 10B.
ENABLING AIR BAG SYSTEM (FOR VEHICLE WITH AIR BAG SYSTEM)
Refer to ENABLING AIR BAG SYSTEM of SERVICE PRECAUTIONS under ON-VEHICLE SERVICE in SEC-
TION 10B.
HANDLING AND STORAGE (FOR SEAT BELT WITH PRETENSIONER)
Refer to HANDLING AND STORAGE of SERVICE PRECAUTIONS under ON-VEHICLE SERVICE in SECTION
10B.
DISPOSAL (FOR SEAT BELT WITH PRETENSIONER)
Refer to DISPOSAL of SERVICE PRECAUTIONS under ON-VEHICLE SERVICE in SECTION 10B.
WARNING:
If replacing seat belt is necessary, replace buckle and ELR (or webbing) together as a set. This is for
the reason of ensuring locking of tongue plate with buckle.
If these parts are replaced individually, such a locking condition may become unreliable. For this rea-
son, SUZUKI will supply only the spare buckle and ELR (or webbing) in a set part.
WARNING:
When performing service on or around air bag system components or air bag system wiring, disable
the air bag system. Refer to DISABLING AIR BAG SYSTEM of SERVICE PRECAUTIONS under ON-VE-
HICLE SERVICE in SECTION 10B
Failure to follow procedures could result in possible air bag activation, personal injury or unneeded
air bag system repairs.
10-4 RESTRAINT SYSTEM