Suzuki RA410, Руководство пользователя

Страница: 754 / 761

WARNING:
After deployment/activation, the metal surfaces of
the air bag (inflator) module and the seat belt pre-
tensioner will be very hot. Do not touch the metal
areas of them for about 30 minutes after deploy-
ment/activation.
Do not place the deployed air bag (inflator) module
and the activated seat belt pretensioner near any
flammable objects.
Do not apply water, oil, etc. to deployed air bag (in-
flator) module and activated seat belt pretension-
er.
If the deployed air bag (inflator) module and the ac-
tivated seat belt pretensioner must be moved be-
fore it is cool, wear gloves and handle it by using
nonmetal material such as the air bag, webbing
and vinyl trim.
Failure to follow procedures may result in fire or per-
sonal injury.
12) Separate (1) the two banana plugs on the deployment har-
ness.
13) Connect the deployment harness to the power source (12V
vehicle battery) (2) to immediately deploy/activate the air bag
or seat belt pretensioner.
14) Disconnect the deployment harness from power source (12V
vehicle battery) (2) and short (3) the two deployment harness
leads together by fully seating one banana plug into the other.
15) In the unlikely event that the air bag (inflator) module or seat
belt pretensioner did not deploy/activate after following these
procedures, proceed immediately with Steps 20) through 23).
If the air bag (inflator) module or the seat belt pretensioner did
deploy/activate, proceed with Steps 16) through 19).
16) Put on a pair of shop gloves to protect your hands from pos-
sible irritation and heat when handling the deployed air bag (in-
flator) module and the activated seat belt pretensioner.
17) Disconnect the deployment harness from the air bag (inflator)
module and the seat belt pretensioner as soon after deploy-
ment/activation as possible.
This will prevent damage to the deployment harness due to
possible contact with the hot air bag (inflator) module and seat
belt pretentioner. The deployment harness are designed to be
reused. They should, however, be inspected for damage after
each deployment/activation and replaced it if necessary.
2
3
AIR BAG SYSTEM 10B-59