Suzuki RA410, Руководство пользователя

Страница: 116 / 761

ELECTRICAL POWER STEERING (P/S) SYSTEM 3B1-9
DTC 11 TORQUE SENSOR MAIN CIRCUIT FAILURE
DTC 13 TORQUE SENSOR MAIN AND SUB CIRCUIT FAILURE
DTC 15 TORQUE SENSOR SUB CIRCUIT FAILURE
1. To main fuse
2. Ignition switch
3. “P/S” fuse (30A) in fuse box
4. “IG METER” fuse (15A) in fuse box 5. P/S control module
6. Torque sensor
7. Connector “A”
8. Connector “C”
C1
C2
C3
C4
C5
W
Y
B
Bl
R
7
8
STEP ACTION YES NO
1 Was “SYSTEM CHECK FLOW TABLE” performed? Go to STEP 2. Go to “SYSTEM
CHECK FLOW
TABLE” in this section.
2 Is DTC 14 or 16 indicated, too? Go to flow table corre-
sponding to each DTC
No.
Go to STEP 3.
3 1) Check proper connection for 5-pin (“C”) connec-
tor to P/S control module.
2) If OK, check torque sensor and its circuit. Refer
to ON-VEHICLE INSPECTION of TORQUE SEN-
SOR.
Is torque sensor in good condition?
Substitute a known-
good P/S control mod-
ule and recheck.
Replace steering
column assembly and
recheck.