Schwing SP 1800-D, Оригинальная инструкция по эксплуатации

Страница: 329 / 390

4.55-5
002.940.02-EN
RENEW OIL SEPARATOR CARTRIDGE
Dismantling:
- Disconnect the plug of the solenoid valve 1
on the separator housing 2 (Fig. 1) and
loosen the air hose 3.
- Loosen the oil return valve 4, as described
above.
- Loosen the compressed air tube 5 from the
separator housing.
- Loosen the radial groove nut 6.
INFORMATION
Observe a mounting mark on the connection
tube 7.
Mark position, if necessary.
The connection tube must be remounted
later in exactly the same position.
- Loosen the connection tube and lift the
separator housing 2 from the oil chamber.
- Remove the connection tube 7 from the
separator housing.
- Lever the cover of the housing 8 with the oil
separator cartridge 12 carefully from the
housing.
- Loosen the nut 9 and remove the sealing disc
10 and top cover 11.
- Remove the old oil separator cartridge 12,
together with O-rings 13.
Mounting:
- Mount the parts in reverse order.
- Always use a new oil separator cartridge and
new seals 10, 13, 14, 15 and 16!
- Press the O-rings 13 with some grease into
the seat pan of the oil separator cartridge.
- Make sure that
- The separator cover 8 is mounted in the
position (arrow) indicated,
and
- The connection tube 7 is mounted
according to its marking.
Fig. 1