Schwing SP 1800-D, Оригинальная инструкция по эксплуатации

Страница: 350 / 390

%
%
%
Portable transmitter.
Receiver with integrated mounting holes.
Multi-pin connecting cable for the receiver according to your specifications.
For explanatory notes on obtaining an operating permit please refer to registration docu-
ments enclosed in the appendix of this operating instruction. Observe all applicable work-
safety and accident prevention regulations carefully. Only fully trained, authorized per-
sonnel may use the NBB radio control equipment. Components, etc. built into the NBB
equipment for safety purposes must be regularly inspected.
Failure to observe these recommendations will put both you yourself and others at risk.
Under these circumstances, NBB rescinds the guarantee and any other form of liability.
This radio control unit is designed exclusively for the control of construction machines
and industrial plants. Only under these conditions are the safety systems (STOP and zero
setting) fully effective. No other form of use is permitted. Any non-observance of this con-
dition will relieve NBB of all liability.
The actual delivery specification is as detailed on the confirmation of order or
the delivery note accompanying the goods!
Even if you are accustomed to working with radio control systems, read these
operating instructions carefully before using this equipment. Only this docu-
ment contains the latest information relating to your NBB radio control system.
If the NBB radio control unit develops a fault, it must be shut down immediately.
The transmitter should be switched off with the STOP key. The connecting cable
must be disconnected at the receiver from the connecting socket (terminal) of
the unit to be controlled . The repair of the equipment must not be carried out ot-
her than by NBB or an NBB authorized technician.
1. STANDARD SPECIFICATION
2. SAFETY PRECAUTIONS