Schwing SP 1800-D, Оригинальная инструкция по эксплуатации

Страница: 261 / 390

4.5-17
000.024.14-EN
Tightening torques for swivel-type fittings
e.g.:
RSWS-WD
Mating material: Aluminium F38
Series
Tube
AD
Thread G
Md
[Nm]
Md
[ft lb]
Series
Tube
AD
Thread G
Md
[Nm]
Md
[ft lb]
L
6 G 1/8 15 11
S
- - - -
6 G 1/4 30 22 6 G 1/4 30 22
8 G 1/4 30 22 8 G 1/4 30 22
10 G 1/4 30 22 10 G 3/8 50 37
12 G 1/4 30 22 12 G 3/8 50 37
12 G 3/8 50 37 14 G 1/2 100 74
15 G 1/2
90
66 16 G 1/2
100
74
18 G 1/2 90 66 20 G 3/4 160 118
22 G 3/4
140
103 25 G 1
270
199
28 G 1 260 192 30 G 1 1/4 420 310
35 G 1 1/4 390 288 38 G 1 1/4 550 406
42 G 1 1/2 550 406 - - - -
Notice:
All screw joints are mounted unoiled.
Mounting the RSWS with sealing edge ring
The version with seal-edge ring should always be mounted by turning 90° from the fixed point
(no more or less).
The edges of the DKR must be pressed into the housing and mating material. The ingress and thus
the torque are highly dependent on the strength/hardness of the mating material.
The torque specified for the RSWS...-
WD may by no means be used for mounting.
The connection would be heavily undermounted.