Schwing SP 1800-D, Оригинальная инструкция по эксплуатации

Страница: 325 / 390

4.55-1
002.940.02-EN
ROTARY COMPRESSOR*
OBSERVE
SAFETY MANUAL
MAINTENANCE PACKAGES
SCHWING provides two different packages of
material for the maintenance of your
compressor:
- Maintenance package 1 (standard
maintenance)
art. no.: 10197336
This package contains all filters, seals and a
reservoir with compressor oil for the
maintenance described below.
The oil quantity is sufficient for an oil change
and possible refill between changes.
- Maintenance package 2 (oil separator
cartridge)
art. no.:
10170388
This package contains an oil separator
cartridge and all seals necessary for the
change thereof.
INFORMATION
In order to ensure a safe and undisturbed
operation, please only use the above
material.
SCHWING is not liable for any damages
caused by improperly performed
maintenance and/or unsuitable material.
* = Special equipment
INFORMATION
Read these instructions prior to starting work.
Do not use flammable substances and naked
flames during cleaning work and
maintenance.
CHECK OIL LEVEL
- Check oil level when drive is at a standstill
and compressor is pressure free (set
pressure gauge to "0").
- Place vehicle on level ground.
- The sight glass 4 serves for checking the oil
level (Fig. 1).
The oil level must exceed the upper edge of
the sight glass.
INFORMATION
The oil level should reach about the centre of
the sight glass with a running compressor.
Fig. 1