Schwing SP 1800-D, Оригинальная инструкция по эксплуатации

Страница: 201 / 390

3.40-11
001.177.19-EN
3.3 OUTSIDE CLEANING
- We recommend the occasional hosing
down with a water hose during breaks to
prevent the concrete setting.
- Lightly spray the outside of the concrete
pump filling hopper with formwork oil.
INFORMATION
Only use environmentally-friendly oils.
Make sure that no oil enters the filling
hopper.
3.4 USE OF HIGH-PRESSURE CLEANERS
(HD cleaners)
WARNING
Poor preparation can cause accidents!
Observe the operating instructions of the
high-pressure cleaner system, and wear the
appropriate personal protective covering.
INFORMATION
New paints are only properly dry after
approx. 3 months.
During this time, do not clean the machine
with an HP cleaner.
This also applies to repainted sub-areas.
Newly painted surfaces may only be cleaned
with a spray hose and cold water during the first
3 months. Use a soft brush, if necessary.
No HP cleaner should be used in areas with
mechanical paint damage, because this can
cause painted areas to separate even more.
Damaged painted surfaces should be repaired
as soon as possible and in a professional
manner.
During subsequent use of the HP cleaner,
please observe:
- Maximum permissible water temperature
60° C.
- Do not use additives.
- Maximum permissible water pressure
100 bar.*
- Minimum permissible spraying distance
30 cm.*
ATTENTION
Damages caused by strong water jet!
If the HP cleaner used generates a higher
water pressure, the spraying distance must
be increased accordingly.
3.4 USE OF CLEANING AGENTS
DANGER
Fire hazard!
Do not use highly flammable agents.
- Do not use aggressive cleaning agents.
They can affect different materials (e.g.
rubber) and painted surfaces.
- Commercially available paint-cleaning and -
care products can be used, provided they
do not exceed a pH value of 9 or fall below
a pH value of 4.
INFORMATION
Ask the manufacturer of the cleaning agent
to confirm its suitability.
Observe his directives on the application and
health protection.
- Always rinse off cleaning agent with clean
water. Do not leave puddles.