Schwing SP 1800-D, Оригинальная инструкция по эксплуатации

Страница: 279 / 390

4.20-3
004.553.03-EN
4.20.5 Extended hydraulic oil change
interval
Through diligent oil care and regular changing
of the oil filter, the oil change interval can be
extended.
The oil quality must be monitored through
regular laboratory tests.
The laboratory report contains the analysis
values of your sample, comments from expert
technicians on the state of the oil and machine,
as well as recommendations on how to
proceed.
For an oil analysis, the oil must be removed
from the system and sent to a laboratory for
analysis.
To keep your personal costs as low as
possible, we recommend analysis sets.
The samples can thus be taken cleanly, quickly
and easily and sent.
4.20.6 Description of the oil sampling
procedure
Take the sample:
- During operation or shortly after shut-down
– because dirt and wear particles are
floating, potentially present water has not
been removed.
- At a normal operating temperature (max.
80°C), warm oil can be removed more
quickly.
- Always following the same method and at
the same point.
- Wherever possible before the filter, never
out of the filter.
- Not shortly after an oil change or after a
large quantity of oil has been refilled.
- Only in a clean and dry sample cup – at
best directly into the "original" from the
analysis set.
You can obtain suitable measuring and flushing
devices via SCHWING.
Please contact our Customer Services:
Telephone: +49 (0) 2325 / 987-231 / 232
Email: service@schwing.de