Schwing SP 1800-D, Оригинальная инструкция по эксплуатации

Страница: 40 / 390

1.7-4
005.142.08-EN
time "Hold" = 200 rpm, adjustable
standard value)
12. Key-operated switch: The operator starts
the motor by turning the key to the "Start"
position.
13. "Motor shutdown via control panel"
button. Switch actuation by the operator.
To shut down the motor, the switch must
be pushed in. Pulling out the switch
causes the release for starting via the
key-operated switch.
Only applies to Fig. 8:
14. Switches on the TSC function
15. Switches off the TSC function
1.7.4.1 Explanation of the TSC function
The TSC function allows you to change and
save the motor’s rotational speed on the control
panel.
The function is the equivalent of a cruise
control in a passenger vehicle.
As long as the control is active, the configured
value will remain saved and can be restored
after any potential interruptions by using the
“TSC” button (14).
As soon as the control is switched off using the
key-operated switch (12) (Fig. 9) that saved
value is deleted.

To configure the rotational speed, enable
the TSC function by pressing button 14
once,

The current rotational speed is then
shown on the display,

Change the rotational speed with the help
of buttons 10 and 11 (snail and hare) see
10. The “Speed reduction” button and 11
The “Speed increase” button .
Fig. 9; IOPU Tier 4f, Stage IV, control panel