Schwing SP 1800-D, Оригинальная инструкция по эксплуатации

Страница: 153 / 390

3.22-3
003.336.15-EN
3.23 PUMPING LINE ON THE PLACING
BOOM
Normally, a truck-mounted concrete pump
pumps the concrete directly via the pumping
line of the constructed placing boom.
A separate placing boom is supplied by a
stationary concrete pump.
DANGER
Loss of stability due to unsuitable
pumping lines!
Delivery pipes with excessive tare weight
(thicker wall thicknesses) and delivery tubes
with larger nominal sizes can overload the
placing boom.
Unsuitable pumping lines cause damage
(especially broken tube holders, cracks in
boom profiles, etc.).
In an extreme situation, the increased tipping
force may cause the machine to topple over.
The concrete pumping line installed on the
placing boom is an integral part of the
machine and may only be changed in strict
accordance with the manufacturer's
instructions.
Due to changes to the pumping line, other
safety-relevant adjustments of the machine
may be mandatory.
After significant changes that are not carried
out by SCHWING, placing booms must be
inspected by an expert before
recommissioning.
See "3.23.3 DISCLAIMER".
3.23.3 DISCLAIMER
Independent changes of the machine and use
of spare- And additional parts
that have not
been approved by SCHWING, meet the
definition of "improper use".
This also applies to the use of individual parts,
such as: Tubes, elbows, couplings, etc.
We would like to draw attention once again to
the fact that SCHWING is not liable for
damages caused by improper or negligent
operation, maintenance and repair or improper
use.
This also applies to expansions and
conversions, as well as other changes to the
machine not approved by SCHWING.
For mounting and operation of separate
pumping lines (tubes or hoses), the operator
bears sole responsibility!