Schwing SP 1800-D, Оригинальная инструкция по эксплуатации

Страница: 213 / 390

3.60-5
002.368.08-EN
Should such oil not be available, please use an
oil with a viscosity level "thinner" than the
recommended gear oil (see gear type plate)
thus
VG 150 instead of VG 220 (industrial gear oil)
or
SAE 80 instead of SAE 90 (vehicle gear oil)
Comparison of viscosity classes
Industrial
standard
Vehicle standard
e.g.
hydraulic
oil
Motor oil Gear oil
ISO-VG SAE SAE
22 5W "thin"
32 10 W 75
46 15 W
68 20 W / 20
100 30 80
150 40
220 50 90
320
460 140
680 140
1000 250 "thick"
1.7 GREASE LUBRICATION POINTS
The KP2K lubricating greases listed in chapter
4.4 are suitable for temperatures up to -20° C.
1.8 ELECTRICAL SYSTEM
The initial capacity of the batteries depends on
the battery status and ambient temperature.
- Ensure good battery status. Remove
batteries when machine is not used.
Store batteries in a warm and dry place,
recharge, if necessary.
- Ensure good contact of the terminal
connections.
- Check the V-belt tension and battery status of
the generator.
1.9 RADIO CONTROL
The radio control is usable up to -20° C.
INFORMATION
Charging the battery becomes problematic
with temperatures below +10° C.
Please heat the driver's cab or use a separate
charger, if possible, at a room temperature of
+20° C.
1.10 SETTING UP THE MACHINE
Frost, thaw, rain, etc. can cause extreme
changes to the load of the bottom.
- Before start of work, check the bottom
conditions and observe them during the
operation.