Schwing SP 1800-D, Оригинальная инструкция по эксплуатации

Страница: 101 / 390

manufacturer's instructions regarding use and safe handling. Wear
protective clothing. Always rinse off cleaning agent thoroughly with
clean water; do not allow puddles to form.
Do not use sea water or other water containing salt for cleaning pur‐
poses.
Do not use any highly flammable agent for cleaning; there is a risk of
fire.
2.8.3 Cleaning with compressed air
When the delivery line is being cleaned with compressed air, there is
an increased risk of accidents caused by compressed air escaping
explosively, spurting concrete, and delivery or end hoses moving un‐
controllably if they have not been removed.
Compressed air should only be used for cleaning purposes under the
supervision of a subject expert. All persons participating in the clean‐
ing procedure must be instructed in the safety regulations.
The manufacturer accepts no liability for damage caused by incorrect‐
ly performed compressed air cleaning. You must observe the follow‐
ing rules without fail when you use compressed air to clean out the
delivery line:
● Individual pipes and short pipe runs up to 10 m in length must not
be blown through with compressed air. There is a risk of accident
from rebound.
● Only blow out delivery lines that have the same nominal diameter
throughout their length. Reducer pipes must be drained and flush‐
ed out by hand.
● No bends, delivery or end hoses may be fitted at the end of the de‐
livery line.
Safety Manual
Concrete delivery and placing machines
01/2018 Rev16 EN
53