Schwing SP 1800-D, Оригинальная инструкция по эксплуатации

Страница: 112 / 390

IP 54 means:
● Complete protection against contact with live components or inter‐
nal moving parts. Protection against damaging dust deposits.
● Water spraying on the equipment from random directions must not
have a damaging effect.
Use only original fuses with the specified voltage rating. Bridging or
the use of fuses with too high a rating can irreparably damage the
electrical system. You must switch off the machine immediately if a
fault occurs in the power supply.
3.7.3 Power at the construction site
The power on the construction site must be supplied from a special
feed point (construction site power distribution point). Machines with
an electric motor must not be connected to the mains power supply.
Only trained and qualified personnel are permitted to work on electri‐
cal systems with an operating voltage of more than 25 volts alternat‐
ing voltage or 60 volts direct current. Only such qualified personnel
may install, connect, disconnect and open electrical control cabinets.
An electric shock (possibly with fatal consequences) may be the re‐
sult of touching machines with electric motors or contact with other
electrical cables if the electrical connection has not been made prop‐
erly or the supply cable is damaged.
3.8 Hydraulic systems
3.8.1 General
Work on hydraulic systems must only be carried out by qualified per‐
sonnel.
Always wear your personal protective equipment when carrying out
work on the hydraulic system. Escaping fluid is toxic and can pene‐
trate the skin.
Safety Manual
Concrete delivery and placing machines
64
01/2018 Rev16 EN