Gulp
TM
PRO
Care and Maintenance Instructions
1
CARE AND MAINTENANCE INSTRUCTIONS
Introduction
The following are care and maintenance instructions for the Gulp
TM
PRO
hand pump series.
The 36” and 21” Gulp
TM
PRO
as well as the Syringe models can be completely disassembled and
cleaned after each use particularly when used in excessively muddy, gravely water.
Cleaning and Care Instructions
The top and bottom portions of the hand-pumps can be loosened in counter-clockwise manner
from the pump cylinder as shown in Figure 1-1. These should only be hand-tight and if your
hands are wet, dry them before attempting this task.
Loosen the
Top and Bottom Ends of the Gulp
TM PRO
Hand Pump
Figure 1-1
Thoroughly wash the inside of the hand pump cylinder, then wash both loosened ends.
Replacement parts for the current are available, see Figure 2-2 below;
Gulp
TM PRO
Replacement Parts
Figure 1-2
