Schwing SP 1800-D, Оригинальная инструкция по эксплуатации

Страница: 219 / 390

3.60-11
002.368.08-EN
2.10 SETTING UP THE MACHINE
The load-bearing capacity of heat-sensitive
subsoils, such as asphalt, decreases as the
ambient temperature rises.
- Ensure a firm underground.
2.11 COLD START
- Pay particular attention to a gentle start of the
system when equipping the machine with
special lubrication for high-temperature
range.
Lubricants of high viscosity (viscous) only
reach their maximum optimum operating
viscosity later on.
The hydraulic pumps can be damaged, as
described under item 1.11.
2.12 PUMP OPERATION
The concrete is frequently prepared in hot
areas with cooled aggregates or cooled water.
The placement of the concrete should take
place preferably during cooler periods of the
time, such as in the morning or evening.
- Rinse a heated pumping line with water
before pumping.
- Use a somewhat mushier start up mixture for
long lines.
- Ensure good pumpability of the concrete.
- Avoid longer breaks.
During pumping breaks, cover the concrete
in the filling hopper of the concrete pump, for
example, with wet bags.
- Start cleaning immediately after pumping.
2.13 DECOMMISSIOING
- Let the machine idle for some minutes with
the pump drive active.
This way, the turbo charger transports the
heat away from the diesel engine and cools
the hydraulic oil by being pumped through
the radiator.