Schwing SP 1800-D, Оригинальная инструкция по эксплуатации

Страница: 141 / 390

3.11-1
005.145.03-EN
3.11 Drive circuit
3.11.1 Starting the diesel engine
CAUTION
Unintentional start-up!
After starting the drive motor, the hydraulic
pumps immediately deliver oil.
In order to prevent the unintentional start-up
of a function, switch all engaged steering
elements to the "0 position" prior to starting.
- Prepare the machine as described in the
“
Establishing operational readiness ”
chapter.
- Insert the key into the key starter switch 12
(Fig. 1/Fig. 2).
- Press the key in slightly and turn it
clockwise to the first locking position.
The warning lights (1 + 2) light up during a
short automatic check (Fig. 1/Fig. 2)
If no faults are detected, the lights go out after
approx. 2 seconds.
- If light 1 (Fig. 3) does not go out, check the
fuel supply.
- Actuate the starter by turning the key
further clockwise.
If the motor fails to start up immediately, do not
continue trying to start it for more than 10
seconds.
After each start-up procedure, take a one-
minute break. Observe cold-start information in
the motor operating instructions.
- Once the motor has started, let go of the
starter key immediately.
Fig. 1; control panel with regeneration.
Fig. 2; control panel with TSC.
Fig. 3