Schwing SP 1800-D, Оригинальная инструкция по эксплуатации

Страница: 334 / 390

4.60-2
005.151.04-EN
- Safety fuses near the vehicle fuse box
(usually in the driver's cab of the truck-
mounted concrete pump).
- Safety fuses in the switch cabinet or
operator station of the concrete pump
(Fig. 2).
- Near the control panel (Fig. 3)
Also see electric circuit diagram.
4.60.5 Changing the fuses of Schwing
components
- Switch off the machine control and the
drive motor.
- Turn the main switch of the starter battery
(1) (Fig. 1) to the “0” position.
- Open the top cover of the switch cabinet or
control station using the special key.
- The allocation of the fuses can be found in
the diagram on the inside of the switch
cabinet cover or in the electrical circuit
diagram.
The fuses are marked with "F".
- Commercial vehicle fuses are used.
- Only replace the defective fuses with new
equivalent ones.
ATTENTION
The electrical/electronic system can be
destroyed due to overrated or bypassed
fuses.
Fig. 1; main switch for the starter battery
Fig. 2; example of an operator station for a
jobsite concrete pump