REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
Drain Water
Removal System
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect
yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property dam-
age! Retain instructions for future reference.
Installation Instructions
SYLT40
331100-001 1/04
© 2004 Wayne Water Systems
System Applications
This system pumps waste water up to an existing water drain
and is designed for residential use in:
Laundry trays
Washing machines
Wet bar sinks
Sinks and tubs
Dehumidifiers
Air conditioners
System Benefits
Completely assembled
Economical
Lightweight
Corrosion resistant
Easily installed
Installs above floor
Fully sealed
Fully automatic
Compact
Suds proof
Installation and Hook Up
1. Connect pipe leading from system to discharge pipe
(Depending on the installation, a coupling or reducer may
be necessary).
2. Apply soapy water to seal in system lid and insert vent
through seal.
3. Verify pipe is inserted 2 inches into lid opening.
Figure 1 - Pump and Housing
Specifications
Sump Pump
Information
Basin Size
Inlet
Discharge
Vent
Weight
Check Valve
4/10 HP
10 Gallon w/ sealed lid
1-1/2”
1-1/2”
1-1/2”
28 lbs.
Included
UL Listed
17” x 11” x 14”
Fully Automatic
4. Test operational cycle. (To prolong the life expectancy of
this system, flush with tap water every three months.
This pump is not designed for use in
septic tanks or underground vaults to
handle raw sewage or effluents. Never use this unit in haz-
ardous or explosive locations.
!
WARNING
Figure 2 - Installation with Sink or Laundry Tub
Figure 3 - Installation with Air Conditioner or
Dehumidifier
