Schwing SP 1800-D, Оригинальная инструкция по эксплуатации

Страница: 14 / 390

1.2-2
001.200.13-EN
ADDITIONAL OPERATING INSTRUCTIONS
SCHWING builds truck-mounted concrete
pumps on chassis frames by different
manufacturers.
These manufactures provide their own
operating instructions about their products.
The same also applies for the manufacturer of
integrated motors used in our construction
concrete pumps.
It is also possible that different special
equipment of your SCHWING machine
disposes of their own operating instructions.
Please observe these documents, because
their contents are not subject to these
operating instructions.
In order to use the machine safely, properly
and efficiently and maintained, precise
knowledge of these operating instructions are
necessary.
We would like to point out, in particular, to
the safety instructions given therein!
Should you ever encounter any problems with
your vehicle or integrated motor, or require
spare parts, please contact directly the
addresses listed in the manufacturer's
operating instructions.
DECLARATION OF CONFORMITY
SCHWING declares that the machine placed
on the market in the European Economic Area
complies with the relevant EC directives.
We confirm this by issuing a "declaration of
conformity" and affixing the "CE" marking to
the machine. See also chap. 1.3.
The original of each declaration of conformity
is archived at SCHWING.
The customer receives a copy of this
declaration in the national language, together
with the delivery note or invoice.
The following pages show each a sample of
the declaration of conformity for truck-mounted
concrete pumps (S) and construction concrete
pumps (SP).
IMPORTANT INFORMATION
Machines placed on the market in the
European Economic Area must comply with
the valid guidelines herein.
This does not apply when the machines are
placed on the market outside the European
Economic Area.
If the design of a machine deviates from the
design required for the European Economic
Area, SCHWING will not issue a declaration
of conformity, and the "CE" marking will not
be affixed.
These machines may not be used within
the European Economic Area!
TERMINATION OF THE DECLARATION OF
CONFORMITY
CE marking and declaration of conformity only
apply to design and scope of delivery of the
machine delivered ex works.
By making changes to the machine without the
approval of SCHWING, as well as the use of
accessories without admission by SCHWING,
both shall lose their validity.
The competent supervisory authorities can
decommission corresponding machines.
SCHWING is not liable for the consequences
of the above manipulations. Operator and
owner of the machine are responsible thereof.