Schwing SP 1800-D, Оригинальная инструкция по эксплуатации

Страница: 133 / 390

3.5-1
004.550.02-EN
EMERGENCY STOP SYSTEM
OBSERVE
SAFETY MANUAL
DANGER
Prior to any working operation, check the
function of all EMERGENCY STOP buttons.
Operating with defective EMERGENCY-
STOP switch is prohibited.
The machine is equipped with
EMERGENCY STOP buttons
on the machine and remote
control (Fig. 1).
In the event of an emergency or fault, the most
important machine functions are immediately
interrupted by pressing one of the
EMERGENCY STOP buttons.
WARNING
The motor is not switched off.
Such special equipment having locked
control levers also continues to run.
- Switch off the motor or special equipment, if
necessary, such as described in the
corresponding chapters.
RECOMMISSIONING
AFTER EMERGENCY STOP
- Switch all locked selector switches and control
levers into the centre or 0 position.
- Remedy the fault.
- Unlock the EMERGENCY STOP button by
turning into the direction of the arrow.
- Start the motor, if necessary, and set the
(diesel) operating speed.
- Start the desired functions with the
corresponding control elements.
The tarnish protection prevents the concrete
pump and agitator from starting by simply
unlocking the actuated EMERGENCY STOP
button.
Fig. 1