Schwing SP 1800-D, Оригинальная инструкция по эксплуатации

Страница: 206 / 390

3.51-2
004.552.01-EN
SEMI-HYDRAULIC OUTRIGGER
(Special equipment)
- Lower the crank support (Fig. 1) until the
supporting dish touches the ground.
- Switch the ball valve into the position
"Outrigger"
INFORMATION
The entire oil flow of the auxiliary pump is
conducted to the outrigger, in the "Outrigger"
position of the ball valve. The auxiliary pump
may not drive any other aggregates.
- Start the drive motor.
- Retract the front, hydraulic supports 1 (Fig. 2)
with the control levers on the machine.
- Shut down the drive motor.
- Unburden the rear mechanical supports 2 by
lowering the machine somewhat at the front
with the crank (Fig. 1).
- Retract the rear supports and secure them
with socket pins and split pins.
- Place the machine with the crank support in a
horizontal position.
Fig. 1
Fig. 2