Schwing SP 1800-D, Оригинальная инструкция по эксплуатации

Страница: 45 / 390

1.7-9
005.142.08-EN
1.7.6 Main switch for starter batteries
The main switch for the starter batteries is
located on the left in the direction of travel for
the machines described in these operating
instructions.
When working on the electrical system,
performing maintenance and conducting
repairs, your machine’s power supply must
always be switched off via the main switch (2)
(Fig. 19) for the starter batteries.
To do this, turn the main switch for the starter
battery (1) (Fig. 21) towards the right to the “0”
position.
1.7.7 Forced switch-off of motor
Interruption of the run-on function!
The motor can be switched off immediately via
a forced switch-off in case of an emergency.
To do so, actuate the button (2) (Fig. 20).
The button is located to the left in the direction
of travel, next to the starter battery.
Only use the interruption of the run-on function
(forced switch-off of motor) in case of
emergency.
ATTENTION
Severe material damage to motor!
Repeatedly forcing the motor to switch off at
short intervals can cause severe motor
damage.
If it is not an emergency, do not shut down the
diesel engine at full load but rather run it at idle
for a few minutes to equalise the temperature.
Failure to observe these instructions may cause
severe motor damage from overheating,
especially with turbo-charged motors.
For certain motors, switching off the motor may
be delayed at operating temperatures that are
too high; motors will continue running for
several minutes!
This automatic run-on function shown on the
display. The run-on function must not be
interrupted during normal operation (no
emergency).
Observe operating instructions of the motor
manufacturer!
Fig. 19; position of the main switch (similar to
illustration)
Fig. 20; main switch for starter batteries and
button for forcing motor to switch off.