Saab 95 1967, Руководство по обслуживанию

Страница: 561 / 610

OUTER HANDLE, UP TO AND INCL. MODEL 1971
6. Sleeve
m
; :iIi/ot 7. Push button
3' Washer 8. Catch pin
4. Washer 9. Lock cylinder
5. Spring
1. As from model 1972:
Remove the screw holding the push button arm (1)
and pull out push button (8) and spring
sssoe
%
OUTER HANDLE, AS FROM MODEL 1972 UP TO AND INCL.
CHASSIS NO. 95773000541 AND 96773000960
1. Arm 6. Sleeve
2. Washer 7. Sealing ring
3. Screw 8. Push button
4. Handle 9. Lock cylinder
5. Spring
2. Press the push button out of the sleeve
3. Insert the key and turn it 35° to the right.
4- Press the catch pin (8) in with a driver (max. 0-12
3 mm).
5- Pull the lock cylinder (9) 0”t Of the push button-
if the key has been lost, the catch Pi" can be driven
Into the lock cylinder by force, using a driver of pin
(with a diameter of max. 0.12 in/3 mm), thus en"
abling the cylinder to be removed from the push mm
ton. This treatment ruins the lock cylinder and a new
one must therefore be fitted.
Disassembly, as from chassis Nos. 95773000542 and
96773000961
1. Remove lock washer 1) securing push button (6) to
the handle
2. Now remove the push buttOn with the lock cylinder
The
push button and lock cylinder form an integral unit
and must not be taken apart.
SCI"
OUTSIDE DOOR HANDLE, AS FROM CHASSIS NOS.
95773000542 AND 96773000961
1. Lock washer 4. Ring
2. Driver 5. Spring
3. Handle 6. Push button and lock cylinder assembly
Reassembly, up to and incl. chassis No. 95773000541
and 96773000960
1. Drive in the catch pin and press the lock cylinder into
the push button.
2. Ease the sleeve onto the push button and then fit the
push button, together with the spring, in the handle.
3. a. Up to and incl. model 1971:
Insert the arm and the washers and drive in the pin.
Note that the two washers have different sizes of
holes.
b. As from model 1972:
Install the push button arm.
WARNING
Up to and incl. model 1971:
Do not press out the pivot that holds driver. The
pivot is guided by two spring loaded balls and can
not be refitted unless a special tool is used.
Assembly,
as from chassis Nos. 95773000542 and
96773000961
1. Insert the push button with lock cylinder and spring
in the door handle.
2. Slide on the driver (2) and press on a new lock washer
(1) using a suitable sleeve.