Saab 95 1967, Руководство по обслуживанию

Страница: 200 / 610

Exhaust pipes of later design having no intermediate sus-
pension, are to be equipped with suspension kit 72 85 182.
Place the mounting 2.36 in. (60 mm) behind the rear edge
of the engine compartment floor.
Rear edge of engine
compartment floor
RUBBER CUSHIONS, UP TO AND INCL. MODEL 1975
S .12
RUBBER CUSHIONS, EXHAUST SYSTEM, UP TO AND INCL.
MODEL 1975
Removal
This work is facilitated if the right side of the car is
. d the right rear Whee
jacked uliltz‘Ienthe exhaUS‘ pipe rubber cushions from the
1. Separa S can be reached from inside the
two nut
floor. The folded back out Of the way_
' rear mat is _
2 :0: 2:: and remove the nuts holding the rubber cush-
ions to the exhaust pipe.
3. Back off and remove the up
muffler rubber cushions to t
the wheel house. .
4 Back off and remove the nuts holding the rubber cush-
ions to the muffler. It may possibly be necessary also
to remove the muffler.
per nuts holding the rear
he bracket on the wall of
Reassembly
Fit the exhaust pipe rubber cushions under the floor.
Screw the rubber cushions onto the rear muffler.
3. Refit the muffler, together with the rubber cushions,
to the bracket on the wall of the wheel house.
4. Secure the exhaust pipe over the rubber cushions in
the floor. Make sure that it is not under tension.
N—e
RUBBER SUSPENSION, EXHAUST SYSTEM, AS FROM
MODEL 1976
The exhaust system is suspended at the rear by means of
two rubber suspension pieces located at the rear muffler.
S 5313
RUBBER SUSPENSION, EXHAUST SYSTEM, AS FROM
MODEL 1976
252—4 um