Saab 95 1967, Руководство по обслуживанию

Страница: 178 / 610

3lzlmm
l.22i0.01o
in.
BALL
AND WEIGHT ARE PLACED IN THE ACCELERATION FLOAT LEVEL
PUMP PASSAGE
1o, Fit the carburetor housing with a new gasket and To adjust the distance, carefully bend the lever stop
replace the float chamber cover. Insert the bolts at the arrow. The (“Stance can be measured by means
and mount the choke cable bracket. Tighten the Of a vernier scale or by means Of a gauge made from
cover. a piece of metal (see illustration).
1 1. Install the choke lever together with spring, at the
same time, hooking the link onto the driver on the
choke valve.
INSTALLATION
1. Fit new gaskets between the intermediate flange and
the carburetor.
2. Mount the carburetor.
3. Connect the throttle cable and choke cable to the car-
buretor.
4. Connect the fuel line, ventilation hose and the vac-
uum hose to the carburetor.
5. Install the air cleaner.
S 5299
SETTING
Checking and adjustment of float level
1. Remove the float chamber cover (see under "Disman.
tling").
2. Hold the float chamber cover vertically so that the
float closes the needle valve. However, the spring.
loaded ball of the needle valve should not be de-
pressed.
The distance between the sealing edge and the bottom
of the float should be 1.12 in. (31 mm) (see illustra.
tion).