Saab 95 1967, Руководство по обслуживанию

Страница: 23 / 610

Type
Choke
Main jet
Float valve
Acceleration pump capacity
Float level
(Distance between the sealing edge of
the carburetor housing and the bottom
of the float with the valve closed. The
ball in the valve should not be pressed
in.)
Choke valve settings
(Maximum opening of valve when choke
lever turned against stop.)
Idling speed
CO-setting (idling speed)
Fast idling setting
(Warm engine. The choke valve is held
fully open while the choke lever is
turned into the position where the
choke valve starts to close. Blank off
the overrun valve hose and disconnect
the vacuum hose from the distributor
to prevent these functions affecting the
fast-idling speed.)
Retardationltime of the overrun valve
from 3 000 rev/min to idling speed
Carburetor
Ford designation
Main jet
Air jet, main system
Transition jet
Air jet, transition system
Idling jet
Acceleration jet
Booster valve
Fast idling speed
Idling speed
CO-content
Throttle valve damper delay time
Opening temperature, PVS-valve
Model 1976
Ford 75 TF—9510—KHA
Manual
122 (Sweden and Finland: 125)
2.0
0.24—0.30 cu. in.
(4-5 cm31/1o strokes
1.22 i 0.04 in. (31 i 1 mm)
0.15 in. (3.8 mm)
850—900 rev/min
0.5—1.0 %
1 500 rev/min
As from chassis
No. 96786003932
Solex 32/32 T010
79 TF 9510—LA
Primary stage
x 122.5 x 130
130 135
—- 60
— 120
42.5
45
60
3 500—3 700 rev/min
850—900 rev/min
1 $0.5 %
4—6 seconds from 3 000 rev/min
to idling speed
approx. 104°C
The carburetor jets have been set by the factory to achieve
optimum performance and must not be tampered with.
noun a
Secondary stage
Model 1977
Ford 77 TF—9510—KDA
Manual
120
2.0
0.135—0.256 cu. in.
(2.2-4.2 cm3)/10 strokes
1.22 i 0.04 in. (31 i mm)
0.15 in. (3.8 mm)
850—900 rev/min
0.5—1.0 %
1 500 rev/min
4—5 sec.
M“