Saab 95 1967, Руководство по обслуживанию

Страница: 269 / 610

WINDSHIELD WIPER MECHANISM
Removal and installation
Left side, L.H.D. cars (Right side, R.H.D. cars)
1, Remove the wiper arm, outer nut and sealings.
2, Remove the combination instrument. This is attached
with a bracket and two nuts. The accessibility will be
improved, if the speedometer is removed.
3. Prize apart the ball joints between the linkages and
the spindle.
4. Unscrew the spindle, using the lower nut. (This nut is
riveted to the spindle.) The fixing nut is located inside
the bracket together with a rubber bushing. Hold this
nut, e.g. with a screw-driver, when you unscrew the
spindle.
Install in the reverse order. Check that the rubber bushing
and the nut are properly placed in the bracket.
NOTE
Check before testing, that the crank arm on the
right spindle (on R.H.D. cars, the left spindle) is
turned upwards. If it is turned downwards, the wip-
er arm goes in the wrong direction and damages the
paintwork.
Right
side, L.H.D. cars (Left side, R.H.D. cars)
1. Remove the wiper arm, outer nut and sealings.
2. Remove the fresh-air channel between the fresh-air in-
take and the heater fan casing.
3. Remove the spindle fixing nut inside the fresh-air in-
take. Prize apart the ball joint and remove the spindle.
Note the fibre washer at the riveted nut on the spindle.
REMOVAL OF
RIGHT WIPER SPINDLE, L.H.D. CAR
Install in the reverse order. L.H.D. cars: Remove the glove
compartment for better accessibility.
NOTE
Check before testing, that the crank arm on the right
spindle (on R.H.D. cars, the left spindle) is turned
upwards. If it is turned downwards, the wiper arm
goes in the wrong direction and damages the paint-
work.
Fcbr 1977
WINDSHIELD WASHER
Cars of model 1967 are fitted with a mechanical wind-
shield washer, the pump being combined with the switch
for the windshield wipers. As from model 1968, the cars
have an electric pump which is started with the same
switch as is used for the windshield wipers.