Saab 95 1967, Руководство по обслуживанию

Страница: 34 / 610

Brake system
GENERAL
Make
As from model 1971, LHD-cars:
Master cylinder
Type, front
Type, rear
Footbrake:
Up to and incl. model 1968
As from model 1969
1) On RHD-cars there are no vacuum servo.
Vacuum servo:
Make
Type
Brake fluid
Handbrake
DIMENSIONS
Brake disc:
Diameter
Thickness
Grinding permitted to min. thickness
(Max. 0.010"/0.25 mm on each side)
Max. total indicated axial throw
Brake drum:
Diameter
Adjustment machining permitted to max.
diameter
Max. total indicated radial throw
Brake shoes
Offcenter grinding of brake linings
Master cylinder:
Diameter, up to and incl. model 1968
Diameter, as from model 1969
Clearance between master cylinder piston
and push-rod
Same clearance at tip of brake pedal
Distance from brake pedal footplate to
the lower part of the dash panel (max.
stroke approx.)
Wheel cylinder:
Diameter, front
Diameter, rear:
Saab 96
Saab 95 up to model 1969
Saab 95 as from model 1970
Brake lines
Brake hoses:
Length, front
Length, rear, Saab 96
Saab 95
Tightening torques:
Castle nut, front wheel hub
Castle nut, rear wheel hub
in”?
Lockheed
ATE
Disc brake
Drum brake
Hydraulic, diagonal twocircuit type
Hydraulic, diagonal twocircuit type
with vacuum servo”
As from model 1971,
Model 1969—1970 LH D-cars
Lockheed ATE
4258—193 T51 /734
Satisfying the requirements of spec. SAE J 1703 or SAE 70 R3.
Mechanical
10 1/2" (266.7 mm)
0.375" (9.5 mm)
0.355" (9.0 mm)
0.008" (0.2 mm)
8” (203.2 mm)
8.06" (204.7 mm)
0.006" (0.15 mm)
8” x 1 1/2"
Thickness of rear brake lining:
0.020—0.022 in. (0.50—0.56 mm)
less than that of the drum
3/4"
13/16”
0.024—0.047" (0.6—1,2 mm)
0.12-0.24" (3—6 mm)
6.3" (160 mm)
2!!
5/8"
a! II
518',
3/16" Bundy-tube
81/2"
8 1/2"
61/2"
177 Mm (18 kpm, 130 ft.|b.)
88 Nm (9 kpm, 65 ft.|b.)
020-19