Saab 95 1967, Руководство по обслуживанию

Страница: 556 / 610

FRONT PLATE WITH HEADLIGHT WIPERS, AS FROM
MODEL 1971
FRONT PLATE WITH GRILL
1. Decor frame, up to and incl. model 1973 6. Fixing screw, fender
2. Rubber bushings
3. Self tapping screw, decor frame
4. Fixing screw for front plate
5. Clamp
Disasembly and installation
1. To remove the front plate first loosen the decor frames.
Loose the headlight washer hoses from the jets and the
cable connections from the headlights. Unscrew the
front plate retaining screws. Loosen the radiator stays
from the body, the radiator suspension straps and the
hood lock control wire.
2. Unscrew the lower screw for the expansion tank brack-
et a few turns and fold the bracket rearwards so that
the wiper motor goes free. Remove the cables from the
wiper motor. Note the cable connections.
3. Move the front plate forwards and lift it out of the
brackets.
Installation is made in the reverse order. See to it that
the rubber strips in the ends of the front plate are fitted
and that the plate is correctly positioned in the guides.
7. Fixing screw, wheel housing stay
8. Self tapping screws for grille plate
9. Grille, up to and incl. model 1973
10. Grille, as from model 1974
Grille
The grille consists of three parts, attached to the front.
On cars up to and incl. model 1973, the grille is divided
into three parts. As from model 1974, the grille is
moulded in plastic in one piece which also encloses the
headlights. The grille is fixed to the front sheet by means
of self tapping screws, all of which are easily accessible
from the front.
REMOVING THE GRILLE
820—4 sans