Saab 95 1967, Руководство по обслуживанию

Страница: 503 / 610

LOOK CYLINDER, UP IO AND INCL. CH
As
95773000341 AND 95773000960 SIS No.
S 3570
LOCK CYLINDER AND GEAR LEVER LOCK
1. Catch pin
2. Lock cylinder
3. Sign plate
4. Gear lever lock
5. Lock plunger
6. Lock plug
7. Retaining washer
8. Cross-recess screw
9. Catch pin (as from model 1970)
Disassembly
1. Insert the ignition key and turn to right hand edge of
the "ASSA" mark.
4 5 5358
POSITION OF KEY AND LOCK PLUNGER DURING ASSEM-
SLY on DISASSEMBLY
1- Catch pin _
2- Position of locking pin during assembl)! 0‘ 'OCk “Md”
3- Gear lever lock
4- Slim plate
5- Position of key during assembly of lock cvlind“
2. When the key is in this position, the catch pin in the
lock cylinder can be pressed in by inserting a wire
Dicklock in a hole on the underside of the steering
column stand. See figures.
0.32 in. (8 mm)
0.1 in. (2.5 mm)
I
R = 0.4 in. (10 mm)
WIRE PICKLOCK
REMOVING LOCK CYLINDER
1. Lock cylinder
2. Lock plug
3. Retaining screw
4. Catch pin (as from model 1970)
3. Pull out the lock cylinder and remove the lock plug
through the cylinder hole.
4. The gear lever lock can now be removed, after re-
moval of the retaining screw.
NOTE
When the lock cylinder is removed the key has no
stop positions and can thus be turned a complete
revolution. If the key takes up an incorrect position,
the locking pins inside the cylinder may get in the
way so that the key cannot be returned to the work-
ing position. To remedy this, tap the key and lock
cylinder lightly against a wooden object with the
retainer on the outside of the cylinder turned up-
wards.
641—13