RelaDyne LubriMist IVT, Инструкция по установке и эксплуатации

Страница: 85 / 256

LubriMist ® Model IVT
Oil Mist Generating System
Installation and Operating Manual
Page 85
of 256
Setting The Current Time
The IVT solid-state controller has a 24-hour timer and date features. The time is given in 24-hour
time format. The time may be adjusted while unit is in operation.
The following are instructions for changing time settings.
1. Press the (a) TIME key (b) to display the current time, day of the week and date entered into
the controller.
2. If the time displayed is not the current time, (a) press the SET, (b) and TIME keys. Time is
registered in hours, minutes and seconds and displayed as (c) HH/MM/SS. Only hours and
minutes are settable. Seconds are recorded to ensure proper chronological ordering of
events.
3. The display will read “SET TIME HOURS”. Program cursor will be under the hour value, (a)
use the INC and DEC keys to adjust. Once finished, (b) press ENTER key.
4. The display will read “SET TIME MINUTES”. Program cursor will now be under the minute
value, (a) use the INC and DEC keys to adjust. Once finished, (b) press ENTER key.
5. Press ENTER once again to return program to run mode.
1(a). Press Time Key To Query Time
1(b). Time Value Is Displayed
2(c) Time Value Is Displayed
3 HOUR Value Is Displayed
4 MINUTE Value Is Displayed
3(a), 4(a). Use The INC and DEC keys
to change Time Values
3(b), 4(b). Use the ENTER Key Input
HOUR – MINUTE Values Into Memory
2 (a) (b). Press SET And TIME Keys To
Enter Edit Mode
5. Press ENTER Key To Return To Run
Mode