RelaDyne LubriMist IVT, Инструкция по установке и эксплуатации

Страница: 115 / 256

LubriMist ® Model IVT
Oil Mist Generating System
Installation and Operating Manual
Page 115
of 256
5. Now it will be necessary to edit the properties of this connection. From under the FILE menu,
select PROPERTIES, and then select the SETTINGS tab. Click on the ASCII Setup button.
Under the ASCII Receiving section deselect the
Wrap lines that exceed terminal width
box.
Select OK when finished.
6. Select the FILE – SAVE to save the setup connection. The connection will be saved and
displayed at the main HyperTerminal screen according to the inputs that were defined at step
number 2. HyperTerminal is now set up to receive the EVENT LOG and the DATA LOG for
the IVT Oil Mist Generator.
NOTICE:
It is recommended that the connection setup be saved prior to
importing data from the IVT Oil Mist Generator. This will ensure that
the data is not duplicated and potential confusion is avoided. If either
log is viewed prior to saving the setup, each time the connection is
executed the data relevant on the setup date will always be displayed.
By saving prior to capturing data, the all of the data viewed will be
current as of the capture date.
a) Select PROPERTIES From Under
The FILE Tab
b) Select The SETTINGS Tab
c) Click The ASCII SETUP Button
d) Deselect “ WRAP LINES THAT
EXCEED TERMINAL WIDTH”
e) Select OK
f) Select OK
Save the Connection Setup
before retrieving data from
the IVT Oil Mist Generator