RelaDyne LubriMist IVT, Инструкция по установке и эксплуатации

Страница: 14 / 256

LubriMist ® Model IVT
Oil Mist Generating System
Installation and Operating Manual
Page 14
of 256
LubriMist® Model IVT Model Code Designations
•
Electrical Standard:
The LubriMist® Model IVT Oil Mist Generator is available in models designed to comply with
either North American or European electrical standards. The first entry of the IVT model code
designates the electrical standard used.
a) Equipment designed to the North American standards is compliant with Article 501 and
505 of the National Electrical Code (NEC) and has been evaluated by Underwriters
Laboratories. The NEC version of the LubriMist® Model IVT has a UL/CUL Listing to
Class I, Division 2, Groups B, C, D temperature code T4 and alternately Class I, Zone 2,
Group IIB + H2, T4
b) Where electrical installations require European standards, the LubriMist® Model IVT Oil
Mist Generator is available to ATEX II 3G Ex ic nA nC db eb mb IIC T4 Gc.
•
Inlet Power:
The LubriMist® Model is available for connection to either 115 or 230 VAC single-phase
power. The purchaser specifies supply voltage. Refer to the model code sheets for options
available for specific voltages and construction.
•
Labeling:
Designates the language used in the operator interface to display messages.
•
Oil Reclamation:
For installations using the patented LubriMist® Closed Loop Oil Mist Systems. The oil reclamation
option includes equipment to reclaim the oil from the return mist header when closed loop
technologies are used. The Oil Mist Reclamation option includes a motor driven centrifugal
coalescer to strip the oil from the return mist stream. A pneumatic driven pump returns the collected
oil into the IVT Oil Mist Generator bulk supply reservoir. A high-level alarm switch is provided. For a
complete description see
Optional Equipment under the PRODUCT DESCRIPTION section of this
manual.
•
Cabinet Accessories:
Several accessories are available when certain environmental and ambient conditions can be
expected. These options are recommended where aggressive or extreme site conditions
exist. The options are designed to improve operational reliability and reduce long term
maintenance. Cold and warm ambient options are available for locations where extremely hot
or cold ambient temperature may be encountered. Air purging is recommended where
extremely corrosive atmospheres may be encountered. For a complete description see
Optional Equipment under the PRODUCT DESCRIPTION section of this manual.
EXPLOSION HAZARD – Substitution of
components may impair suitability for II
3G Ex ic nA nC db eb mb IIC T4 Gc
WARNING
EXPLOSION HAZARD – Substitution of
components may impair suitability for Class
I, Division 2
WARNING