RelaDyne LubriMist IVT, Инструкция по установке и эксплуатации

Страница: 222 / 256

LubriMist ® Model IVT
Oil Mist Generating System
Installation and Operating Manual
Page
222 of
256
Component Identification
Tag Description
PT-1 Pressure Transducer – Mist Pressure
PT-2 Pressure Transducer – Regulated Air Pressure
PT-3 Pressure Transducer – Supply Air Pressure
PT-4 Pressure Transducer – Supply Oil Pressure
TE-1 Temperature Sensor – Supply Oil Reservoir (TC)
TE-2 Temperature Control – H-1 Air / Oil Heater Control (TC)
TR-3 Temperature Sensor – H-1 Air / Oil Heater Cut-Out (TC)
TE-4 Temperature Control – H-2 Air / Oil Heater Control (TC)
TE-5 Temperature Sensor – H-2 Air / Oil Heater Cut-Out (TC)
TE-6 Temperature Sensor - Ambient Air
TE-7 Temperature Control – H-3 Air Pre-Heater Control (TC)
TE-8 Temperature Sensor – H-3 Air Pre-Heater Cut-Out (TC)
TE-9 Temperature Start Sensor – H-3 Air Pre-Heater (TT)
H1 Air / Oil Heater, Main Oil Mist Generator
H2 Air / Oil Heater, Auxiliary Oil Mist Generator
H3 Air Pre-Heater
H4 Cabinet Heater w/ Thermostat – Operator Access Compartment
H5 Cabinet Heater w/ Thermostat –Mechanical Compartment
XL-1 Green Local Status Light – Normal
XL-2 Red Local Status Light – Fault
PSL Pressure Switch – Low Regulated Air Pressure – Auxiliary Unit
S-1 Solenoid Operated Air Valve – Oil Supply Pump Control
S-2 Solenoid Operated Air Valve – Auto Bulk Fill
S-3 Solenoid Operated Air Valve – Cabinet Cooler Control (ATEX only)
LT-1 Level Transmitter – Bulk Oil Reservoir
D-1 Oil Mist Density Sensor
LS Oil Level Control Switch
LSL Low Oil Level Switch
LSH High Oil Level Switch – Demisting Reservoir
UY-1 Relay –Unit Status – Hermetically Sealed
EC-1 Electronic Controller – Main Oil Mist Generator
EC-2 Electronic Controller – Auxiliary Oil Mist Generator
TS-1 Temperature Switch – Cabinet Cooler Control (ATEX only)