RelaDyne LubriMist IVT, Инструкция по установке и эксплуатации

Страница: 160 / 256

LubriMist ® Model IVT
Oil Mist Generating System
Installation and Operating Manual
Page 160
of 256
•
Disconnect all electrical supply and remote alarm wiring. For power and alarm wiring
connection locations reference the
INSTALATION section of this manual. Disconnect the
oil mist outlet connection. For oil mist outlet connection location reference the
INSTALATION section of this manual
The IVT console is constructed with an integral skid base. The base is fashioned with slots for
lifting and handling the IVT using a fork truck. Slot dimensions are 8 ¾" (w) x 4” (h) or 222 mm x
100 mm. Unbolt the machine form its foundation to remove.
Do not tip or stand equipment on edge
Use a fork truck or similar suitable transport
equipment for lifting and setting the equipment
into place. Ensure that the equipment is secured
and tied to the fork truck prior to and during
transport. Stand clear of the fork truck while the
equipment is being maneuvered. Fork truck
operators should be properly trained in its
operation.
WARNING
ENSURE THAT ALL PREVIOUSLY CONNECTED
SOURCES OF ELECTRICAL POWER ARE
DISCONNECTED BEFORE OPENING THE AC
POWER REMOTE ALARM ENCLOSURES AND
ATTEMPTING TO DISCONNECT ELECTRICAL
WIRING ALARM CONTACTS