RelaDyne LubriMist IVT, Инструкция по установке и эксплуатации

Страница: 30 / 256

LubriMist ® Model IVT
Oil Mist Generating System
Installation and Operating Manual
Page 30
of 256
Inlet Supply Air Pressure Transducer
The incoming air supply is monitored using a two-wire 4-20 mA output pressure transducer. It is
mounted on the air distribution manifold in the inlet air supply. It is connected to the IVT controller
with an integral flex cord. The transducer provides the signal for high inlet air pressure alarm and
low inlet air pressure alarm. During operation the signal is used to provide an operating inlet air
pressure value.
Ambient Air Temperature Sensor
The ambient air temperature is monitored using a 100-ohm platinum RTD. The RTD sensor is
installed in a machined plastic bulkhead by use of a thermocouple tube connector. It is connected
to the IVT controller with an integral flex cord. The ambient air temperature sensor is a monitor
function only. There are no alarm functions associated with this device.
Plan View
Ambient Air Sensor
Supply Air Pressure Transducer
Air Distribution Manifold
View G-G