RelaDyne LubriMist IVT, Инструкция по установке и эксплуатации

Страница: 16 / 256

LubriMist ® Model IVT
Oil Mist Generating System
Installation and Operating Manual
Page 16
of 256
Tag Detail for NEC Model IVT
LubriMist® IVT Oil Mist Generators manufactured compliant with Underwriters Laboratories
UL/CUL Listing to Class I, Division 2, Groups B, C, D temperature code T4 and alternately,
Class I, Zone 2, Group IIB + H2, T4. Equipment is labeled as follows. Note that temperature
codes may vary with certain model numbers.
Data Ref. Description Example
Model Code Per Cust. P.O. & CFH-RS Job Order
See ”
LubriMist® Model IVT Model Code Designation Key ”
IVT-NAEXX
Serial No. Unique Serial Numbers are to be issued to each machinery item. The CFH-RS Sales Order
Number is used as serial number prefix, and is followed with a designation for mist flow capacity
specific to the machine being manufactured. The last designation differentiates multiple
machinery’s sold under the same sales order
Sales Order Number
Mist Generating Capacity
060 = 60 Bearing Inch
213 = 213 Bearing Inch
475 = 475 Bearing Inch
933 = 933 Bearing Inch
Item X of Y quantity produced on S.O.
!!!!!!
-
!!!
-
!!
Series No. Indicates Model Series that the machinery is manufactured. Series numbers are maintained
through revision log. When an Engineering Change is made to the product, those changes are
recorded as a change in Series Number.
This manual is for equipment entering the market as Series 201 A______, (October 2007)
201 A
Volts AC Machinery is available for connection to either 115 VAC or 230 VAC electrical power. Purchaser
specifies the electrical power requirement. Reference ”LubriMist®
Model IVT Model Code
Designations ”
For 115 VAC power____________________________
For 230 VAC power____________________________
κ
NOTE: Ratings do not include electric motor drivers for “Oil Mist Reclamation” option.
115 VAC
230 VAC
Power Maximum operating power requirement at the specified voltage with the power switch for both
the “MAIN” and “Auxiliary” oil mist generator in the ON position.
Machinery for use at 115 VAC___________________
Machinery for use at 230 VAC___________________
“AIR PREHEATER” option is available with 115 and 230 VAC models. Amperage is with the
power switch for both the “MAIN” and “Auxiliary” oil mist generator in the ON position.
Reference ”LubriMist®
Model IVT Model Code Designations ”
Machinery with “AIR PREHEATER” option:
Machinery for use at 115 VAC___________
Machinery for use at 230 VAC___________
“CABINET HEATING” option is available with 115 and 230 VAC models. Power requirement
shown is for a separate power circuit from the IVT oil mist generator power circuit.
Reference ”LubriMist®
Model IVT Model Code Designations ”
Machinery with “CABINET HEATING” option:
Machinery for use at 115 VAC___________
Machinery for use at 230 VAC___________
15.5 AMP
7.8 AMP
22.9 AMP
11.5 AMP
200 WATT
200 WATT
UL
LubriMist
®
C
®
US
Model No
Serial No.
Max Inlet Air Pressure; 150 PSIG / 10.3 Bar
Operating Temperature -40°C < T amb < +60°C
Class I Division 2 Groups B, C, D - T
Listed Oil Mist Generator for Hazardous Locations
Volts AC 50 / 60 Hz Amps
Series No.
LISTED
713/464-6266
l
e-mail Info@LSC.COM
l
Fax 713/464-
Lubrication Systems Co. Houston Texas
USA
23 PN
Class I, Zone 2, Group IIB + H2, T