Raritan PX3TS, Руководство пользователя

Страница: 694 / 842

Appendix C: Configuration or Firmware Upgrade with a USB Drive
670

The specified firmware file must be compatible with your PX3TS and
have an official Raritan signature.

If the specified firmware file is the same as the current firmware
version of your PX3TS, no firmware upgrade is performed.
config

Specify the name of the configuration file containing device settings.

The suggested filename is
config.txt. See config.txt
(on page 672).
device_list

Specify the name of the configuration file listing all PX3TS devices to
configure and their device-specific settings.

This file is required if any macros are used in the device
configuration file "config.txt."

The suggested filename is
devices.csv. See devices.csv
(on page
674).
match

Specify a match condition for identifying a line or a PX3TS device in
the device configuration file "devices.csv."
The option's value comprises one word and one number as explained
below:

The word prior to the colon is an identification property, which is
either
serial
for serial number or
mac
for MAC address.

The number following the colon indicates a column in the
devices.csv file.
For example,
mac:7
instructs the PX3TS to search for the MAC
address in the 7th column of the "devices.csv" file.

The default value is
serial:1
, making the PX3TS search for its
serial number in the first column.

This option is used only if the "device_list" option has been set.
collect_diag

If this option is set to
true
, the diagnostic data of the PX3TS is
transmitted to the USB drive.

The filename of the diagnostic data written into the USB drive varies,
depending on the PX3TS firmware version:

Filename prior to version 3.0.0:
diag_<unit-serial>.tgz, where
<unit-serial> is the serial number of the PX3TS.

Filename as of version 3.0.0:
diag_<unit-serial>.zip