Raritan PX3TS, Руководство пользователя

Страница: 627 / 842

Chapter 8: Using the Command Line Interface
603
Removing an Existing Radius Server
This command removes an existing Radius server from the server list.
config:# authentication radius delete <server_num>
Variables:

<server_num> is the sequential number of the specified server in the
Radius server list.
Environmental Sensor Configuration Commands
An environmental sensor configuration command begins with
externalsensor. You can configure the name and location parameters of
an individual environmental sensor.
Note: To configure an actuator, see
Actuator Configuration Commands
(on page 619).
Changing the Sensor Name
This command names an environmental sensor.
config:# externalsensor <n> name "<name>"
Variables:

<n> is the ID number of the environmental sensor that you want to
configure. The ID number is available in the PX3TS web interface or
using the command "
show externalsensors <n>
" in the CLI. It is
an integer between 1 and 32.

<name> is a string comprising up to 64 ASCII printable characters.
The <name> variable must be enclosed in quotes when it contains
spaces.
Note: To name an actuator, see Actuator Configuration Commands (on
page 619).