
Chapter 6: Using the Web Interface
170
Message
Status
Overload Detected
An overload is present.
When the PX3TS device detects an overload
condition on the outlet, it shuts down the
outlet completely to protect the inlets.
The state of the switch remains off as long as
the overload alarm is present.
The load will restore power after performing
both actions below:
Resolve the overload problem.
Manually clear the overload alarm by
performing a manual transfer. To clear
the alarm, see
Manual Transfer When
an Alarm is Present
(on page 85).
Internal Fault
A switch open or switch short fault is detected on
the Inlet 1/2 switch.
Note: In the "off" state, neither inlet on the Transfer Switch page shows
the
icon.
Inlet Phase:
Field
Description
Inlet Phase Sync
Indicates whether the phase angles of both
inlets are in synchronization or not.
in sync: The inlets are in synchronization
when their phase angle difference does
NOT exceed 15 degrees.
out of sync: The inlets are out of
synchronization when their phase angle
difference is over 15 degrees.
The 15-degree threshold is not
user-configurable, and it is not related to the
warning/critical thresholds of the 'Inlet
Phase Angle' sensor.
Inlet Phase Angle
Indicates the value of phase angle difference,
which is the phase shift between the two
inlets' voltage signals.
Содержание PX3TS
