Raritan PX3TS, Руководство пользователя

Страница: 328 / 842

Chapter 6: Using the Web Interface
304
Editing or Deleting IP Access Control Rules
When an existing IP access control rule requires updates of IP address
range and/or policy, modify them accordingly. Or you can delete any
unnecessary rules.
To modify or delete a rule:
1. Choose Device Settings > Security > IP Access Control.
2. Go to the IPv4 or IPv6 section.
3. Select the desired rule in the list.

Ensure the IPv4 or IPv6 checkbox has been selected, or you
cannot edit or delete any rule.
4. Perform the desired action.

Make changes to the selected rule, and then click Save. For
information on each field, see
Creating IP Access Control
Rules
(on page 301).

Click to remove it.

To resort its order, click or .
5. Click Save.

IPv4 rules: Make sure you click the Save button in the IPv4
section, or the changes made to IPv4 rules are not saved.

IPv6 rules: Make sure you click the Save button in the IPv6
section, or the changes made to IPv6 rules are not saved.
Creating Role Access Control Rules
Role-based access control rules are similar to IP access control rules,
except that they are applied to members of a specific role. This enables
you to grant system permissions to a specific role, based on their IP
addresses.
Same as IP access control rules, the order of role-based access control
rules is important, since the rules are executed in numerical order.
To create IPv4 role-based access control rules:
1. Choose Device Settings > Security > Role Access Control.
2. Select the "Enable Role Based Access Control for IPv4" checkbox to
enable IPv4 access control rules.
3. Determine the IPv4 default policy.

Accept: Accepts traffic when no matching rules are present.