Raritan PX3TS, Руководство пользователя

Страница: 574 / 842

Chapter 8: Using the Command Line Interface
550
config:# security ipAccessControl ipv4 rule add <direction> <insert> <rule_number>
<ip_mask> <policy>

IPv6 commands
Add a new rule to the bottom of the IPv6 rules list:
config:# security ipAccessControl ipv6 rule add <direction> <ip_mask> <policy>
Add a new IPv6 rule by inserting it above or below a specific rule:
config:# security ipAccessControl ipv6 rule add <direction> <ip_mask> <policy> <insert>
<rule_number>
-- OR --
config:# security ipAccessControl ipv6 rule add <direction> <insert> <rule_number>
<ip_mask> <policy>
Variables:

<direction> is one of the options:
in or out.
Direction Description
in Inbound traffic.
out Outbound traffic.

<ip_mask> is the combination of the IP address and subnet mask
values (or prefix length), which are separated with a slash. For
example, an IPv4 combination looks like this:
192.168.94.222/24.

<policy> is one of the options: accept, drop or reject.
Policy Description
accept Accepts traffic from/to the specified IP
address(es).
drop Discards traffic from/to the specified IP
address(es), without sending any failure
notification to the source or destination host.
reject Discards traffic from/to the specified IP
address(es), and an ICMP message is sent to the
source or destination host for failure notification.