Raritan PX3TS, Руководство пользователя

Страница: 378 / 842

Chapter 6: Using the Web Interface
354
a. In the Available field, select desired methods one by one, or click
Select All. See step 3 for details.
b. In the Selected field, click any method's to remove
unnecessary ones, or click Deselect All.
Action Group
You can create an action group that performs up to 32 actions. After
creating such an action group, you can easily assign this set of actions to
any event rule rather than selecting all needed actions one by one per
rule.
If the needed action is not available yet, create it first. See Available
Actions (on page 350).
Operation:
1. Choose Device Settings > Event Rules > .
2. Select "Execute an action group" from the Action list.
3. To select any action(s), select them one by one from the Available
Actions list.

To select all available actions, click Select All.
4. To remove any action(s) from the Selected Actions field, click that
action's .

To remove all actions, click Deselect All.
Change Load Shedding State
The "Change load shedding state" action is available only when your
PX3TS is able to control outlet power. Use this action to activate or
deactivate the load shedding mode for responding to a specific event. For
additional information, see
Load Shedding Mode (on page 199).
Operation:
1. Choose Device Settings > Event Rules > .
2. Select "Change load shedding state" from the Action list.
3. In the Operation field, select either one below:

Start Load Shedding: Enters the load shedding mode when the
specified event occurs.

Stop Load Shedding: Quits the load shedding mode when the
specified event occurs.