Raritan PX3TS, Руководство пользователя

Страница: 695 / 842

Appendix C: Configuration or Firmware Upgrade with a USB Drive
671

The PX3TS beeps after it finishes writing the diagnostic data to the
USB drive.
factory_reset

If this option is set to
true
, the PX3TS will be reset to factory
defaults.

If the device configuration will be updated at the same time, the
factory reset will be executed before updating the device
configuration.
bulk_config_restore

Specify the name of the bulk configuration file used to configure or
restore the PX3TS.
Note: See Bulk Configuration (on page 418) for instructions on
generating a bulk configuration file.

Additional configuration keys set via the
config.txt file will be applied
after performing the bulk restore operation.

This option CANNOT be used with the option "full_config_restore."

If a firmware upgrade will be performed at the same time, you must
generate the bulk configuration file based on the NEW firmware
version instead of the current firmware version.
full_config_restore

Specify the name of the full configuration backup file used to restore
the PX3TS.
Note: See
Backup and Restore of Device Settings
(on page 425) for
instructions on generating the full configuration backup file.

Additional configuration keys set via the
config.txt file will be applied
after performing the configuration restore operation.

This option CANNOT be used with the option "bulk_config_restore."

If a firmware upgrade will be performed at the same time, you must
generate the full configuration backup file based on the NEW
firmware version instead of the current firmware version.
switch_outlets

This feature works on outlet-switching capable models only.

Switch on or off specific outlets.

The option's value comprises outlet numbers and the setting "on" or
"off" as explained below:

Each "on" or "off" setting consists of three parts: outlet numbers,
a colon, and the word "on" or "off".

Each "on" or "off" setting is separated with a semicolon.