Raritan PX3TS, Руководство пользователя

Страница: 527 / 842

Chapter 8: Using the Command Line Interface
503
Configuring Power Transfer Features
Enter the configuration mode to change the following power transfer
settings. See
Entering Configuration Mode
(on page 500).
You can change various power transfer settings at a time by combining
various commands. See
Multi-Command Syntax (on page 635).
Enable or disable the front panel Manual Transfer button:
config:# ts manualTransferButton <option1>
Enable or disable automatic retransfer:
config:# ts autoRetransfer <option2>
Determine the wait time for automatic retransfer after the
preferred inlet restores to normal:
config:# ts autoRetransferWaitTime <option3>
Enable or disable the phase sync requirement for automatic
retransfer:
config:# ts noAutoRetransferOnPhaseDifferenceFault <option4>
Name the transfer switch:
config:# ts name "<name>"
Variables:

<option1> is one of the options:
enable or disable.
Option Description
enable The Manual Transfer button is enabled.
disable The Manual Transfer button is disabled.

<option2> is one of the options:
enable or disable.
Option Description
enable Enables the automatic retransfer.